Invisible Coating

Invisible Coating is a vapour-permeable nano impregnate with hydrophobic and oleophobic properties that does not change the colour of the stone. It creates an invisible nano-coating that repels water and grease particles. Running water droplets collect dirty particles, keeping surfaces cleaner for longer. It protects against material corrosion by preventing water penetration.

Key Benefits

• Does not change the colour of the stone
• Limits grease absorption
• Repels water particles
• Contains active silver particles (Nano Silver Antibacterial Technology)
• Solvent-free
• For indoor and outdoor use
• Does not produce an irritating odour

Technical Specifications

• Consumption: 20–100 ml/m² (depending on surface absorbency)
• Application temperature: 5–40°C
• Drying: protect from water for 4 hours after application
• Available sizes: 0.7L, 1L, 2L

Suitable for absorbent stones such as slate, limestone, marble and sandstone. Not suitable for polished stone finishes.

Application Instructions

Before applying, protect all glass, plastic, wooden surfaces and plants. Apply to a dry, clean surface using a brush, roller or sprayer. Spread thoroughly over the surface. Wipe off excess impregnate with a clean cloth.

Before full application, perform a test on a small area to check the desired effect. Shake well before use.

Safety Information

Signal word: WARNING

Keep out of reach of children. Causes skin irritation. Causes serious eye damage.

Keep the container tightly closed. Avoid breathing liquid vapours. Do not eat, drink or smoke when using this product. Do not ignite. Wear protective gloves and protective clothing.

First aid:
If swallowed: immediately contact a poison control centre or doctor.
If on skin: wash with plenty of water and soap.
If in eyes: rinse cautiously with running water for several minutes.

Made in EU.