Intensive Colour

Intensive Colour is a vapour-permeable nano sealer for unpolished natural stone that enhances the natural colour and brings out veining patterns. Unlike Invisible Coating, Intensive Colour is designed to deepen and enrich the appearance of the stone while providing long-lasting protection.

Key Benefits

• Enhances natural stone colour and veining
• Hydrophobic and oleophobic protection
• Contains Nano Silver Ag+ Antibacterial Technology
• Solvent-free
• No irritating odour
• For indoor and outdoor use
• Vapour-permeable

Technical Specifications

• Consumption: 20–100 ml/m² (depending on surface absorbency)
• Application temperature: 5–40°C
• Drying: protect from water for 4 hours after application
• Available sizes: 1L, 2L

Suitable for unpolished absorbent stones such as slate, limestone, marble and sandstone. Not suitable for polished stone finishes.

Application Instructions

Before applying, protect all glass, plastic, wooden surfaces and plants. Apply to a dry, clean surface using a brush, roller or sprayer. Spread thoroughly over the surface. Wipe off excess impregnate with a clean cloth.

Before full application, perform a test on a small area to check the desired effect. Shake well before use.

Safety Information

Signal word: WARNING

H319: Causes serious eye irritation. H315: Causes skin irritation. P102: Keep out of reach of children. P264: Wash hands thoroughly after handling. P280: Wear protective gloves and eye protection.

P305 + P351 + P338: If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313: If eye irritation persists: get medical advice.

Made in EU.